工作服对于企业非常重要，可以说是企业的“脸面”，是一个企业的性和企业文化的体现。所以一家好的企业，员工所穿的工作服的质量是一定要过关的，今天教你看工作服的质量。
　　Work clothes are very important to the enterprise. It can be said to be the "face" of the enterprise. It is the embodiment of the professionalism and enterprise culture of an enterprise. So a good enterprise, the staff wear the quality of the work clothes must be passed, today to show you the quality of the work clothes.
　　1.工作服定做的外观，商品整洁，平伏，折叠规矩，左右对称，各部位熨烫平整，无漏烫，无死褶，商品无线头，无纱毛，各部位符合规范需求，线与布料相适应，包括色泽，质地，牢度，缩水率等方面，两者应大致一样，以能确保厂服的内在质量与外观质量为准，钮扣的色泽应与布料色泽相等。
　　1. overalls made the appearance of merchandise clean, flat, folded rule, symmetrical parts, hot pressed, no leakage, no pleat, goods without thread, without wool, all parts meet the specification requirements, line and cloth to adapt, including color, texture, color fastness, shrinkage and other aspects of the two. Should be roughly the same, which can ensure the inherent quality and appearance quality of the clothing factory as the standard, the color and fabric color buttons should be equal.

　　2.工作服定做的色差，工作服定做色差规则是对质料的需求，即对衣服布料的需求，根据有关规范对色差的规则，厂服的上衣领，袋布料，裤侧缝是首要部位，色差高于四级，其他外表部位四级，厂服商品的色差检验，其东西是借用“染色牢度褪色样卡”，该样卡是原纺织工业部制定的规范之一，样卡用五对灰色标样组成，分为五个等级，五级代表褪色牢度佳，色差等于零，四级至一级代表褪色相对递加的程度，一级表明严峻。
　　2. color overalls made of material needs, overalls made of fabric color rules, requirements, according to the national standard of color rules on the collar, clothing factory bag cloth pants, side seam is the primary site, the color is higher than four, other parts of the appearance of four, color clothing factory the commodity inspection, the thing is to use fastness fade like card, the card is one of the original national standards formulated by the Ministry of textile industry, the sample card is composed of five samples of gray, is divided into five grades, five representatives of the best color fastness fade, is equal to zero, on behalf of grade four to grade one fade the increasing degree of relative level, show the most serious.
　　3.工作服定做的疵点，规范规则，每个独立部位只答应有疵点一处，独立部位是对衣片所区分的区域，按衣片的主次部位，分1，2，3，4四个区域，每个部位即是衣片上的一个区域，如上衣有两个前片，每片都属1部位，工作服定做每个部位即是一个独立部位，两个1部位即是两个独立部位，在这个独立部位中，既有衣片又有贴袋和袋盖，规范规则每个独立部位，只答应有疵点一处，即是说衣片上有疵点，在这个独立部位内的贴袋和袋盖上就不许再有疵点，疵点的品种因不一样的布料而不一样，判守时要按规范规则进行。
　　3. overalls made defects, standard rules, each individual site only to have a defect, independent parts is to differentiate the tablet area, according to primary and secondary clothing piece is divided into 1 parts, 2, 3, 4, four regions, each part of which is an area on the jacket, such as coat there are two tablets before, each piece is 1 parts, each part of the custom work clothes is an independent part, the two part 1 is two independent parts in the independent part, both garment and bag and bag cover, standard rules of each individual site, only to have a defect that is to say, a piece, in this independent site within the patch pockets and bag cover are not allowed to have the defect, the defect due to different varieties of cloth and not the same, should be carried out according to the standard rules to punctuality.

本文由济南工作服定制友情奉献,更多有关的知识请点击:http://www.sdzzfs.com/我们将用先进的技术，真诚的态度,为您提供为全面的服务。我们将会陆续向大家奉献，敬请期待。